Ingenious:
A rotating brush combs out the braided shield strands. Subsequently the shield strands are then cut between two rotating blades.
Flexible:
The supplied standard guide set enables a wide range of cable diameters to be processed. The clamping jaws and shield cutting blades are universal and do not have to be changed for different cable sizes.
Repeatable:
The ShieldCut 8100 is equipped with reliable drives and high-performance control software for repeatable, high-quality results that cannot be achieved with manual shield processing.
Intuitive:
The machine is equipped with an intuitive, high-definition 7-inch color touchscreen user interface.
Application Range
Material
- Shielded Cables
Processing Capabilities
Shield cutting multiconductor cable
Shield cutting twisted pair cable
Technical Data
| Raw Material Diameter | Minimum 2 mm (0.08″) Maximum 9 mm (0.35“) |
| Shield Cut Length | Minimum 10 mm (.39″) Maximum 120 mm (4.72“) |
| Jacket to Shield Distance | Minimum 1.5 mm (0.06“) |
| Cycle Time | > 3s (depending on cable type and shield cut length) |
| Memory Capacity | 1,000 cable |
| Interfaces | 2 x USB, Foot Pedal |
| Noise Level | <70 db (A) |
| Power Supply | 100/115 VAC, 230/240 VAC, 150 VA, 50/60Hz |
| Compressed Air Connection | 0.5 – 0.7 Mpa (5-7 bar) |
| Dimensions (L x W x H) | 600 x 220 x 360 mm (23.6 x 8.7 x 14.2″) |
| Weight | 18 kg (40 lbs) |
| CE Conformity | ShieldCut 8100 complies fully with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
| Important Note | Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. |
